Mini SAS 8087 90 degree left angle to 4 SATA 90 degree locking SFF-8087
Applications:
- Internal SAS SFF-8087 to 4x SATA Cable, Left Angle to 90-degree locking, 0.5 meter/1 meter.
- AWG30 Twin-axial 8-pair high-bandwidth low-skew wire.
- Impedance = 100 Ohms.
- Up to 6Gbps data rates per channel.
- This Mini SAS to SATA cable provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and drives on the SATA end.
Product Detail
Product Tags
| Technical Specifications |
| Warranty Information |
| Part number STC-T037
Warranty 3 Years |
| Hardware |
| Cable Jacket Type PVC - Polyvinyl Chloride |
| Performance |
| Type and Rate 6Gbps |
| Connector(s) |
| Connector A 1 - Mini SAS SFF-8087
Connector B 4 - SATA 7P Female with 90-degree locking |
| Physical Characteristics |
| Cable Length 0.5/1m
Color Blue wire+ black nylon Connector Style left Angle to 90 degrees with locking Product Weight 0.1 lb [0.1 kg] Wire Gauge 30 AWG |
| Packaging Information |
| Package Quantity 1Shipping (Package)
Weight 0.1 lb [0.1 kg] |
| What's in the Box |
Mini SAS 36Pin (SFF-8087) Male left angle to 4 SATA 7Pin Female with 90-degree locking Cable, Mini SAS Host/Controller to 4 SATA Target/Backplane, 0.5M.
|
| Overview |
Product Description
SFF-8087 Left Angle to 4 SATA 90-degree locking Breakout Cable
1> STC SFF 8087 Mini SAS left angle to 4 SATA 90 degree locking Cable is SAS RAID controller to sata hard drive cable, This Mini SAS controller to sata target cable is designed with labeled for easy setup, locking connector latches provide stable connection.
2> Internal Mini SAS SFF-8087 left angle to 4 sata 90-degree locking driver cable with SFF-8087 port for connection to RAID or PCI-e controllers, the sas breakout cable with locking latch, providing a reliable internal link between the serial SCSI controller and the SATA connector
3> Internal mini sas left angle to 4 sata 90-degree locking data cable fully exploits hardware RAID performance via Serial Attached SCSI (SAS) and shares performance with compatible host bus adapters via PCI-e 4 lanes, supporting data transfer rates of up to 6Gbs per drive
4> SFF 8087 Mini SAS left angle to 4 sata 90-degree locking breakout cable used thin sas cable and tape/braid weaved design with 0.5m and 1m options. Woven mesh sheath covers the cable for easy routing, P1 to P4 cables are labeled and provide easy to routing after installation, it is a good choice for DIY and professional installers. 5> Internal SAS Date Cable-- It connects a RAID or PCI-e controller with an SFF-8087 port to 4 discrete SATA drives with shrapnel; Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and directly attached storage devices with a SATA connector.
6> This Cable, a 4x7Pin SATA port, connects to the motherboard or RAID Controller with SATA ports. Mini SAS 36 (SFF-8087) is the target, connected to the Backplane with MINI-SAS port.
7> The 0.5m/1m cable harness of SAS to SATA cable provides sufficient length for internal cable management; Slim ribbon cables minimize airflow impact in a computer case.
8> It supports up to 6-12Gbs data transfer rate per drive.
|
