M.2 PCIe (A+E Key) to 2 Ports SATA 6Gbps Expansion Card

Applications:

The M.2 to dual SATA adapter is used to convert the M.2 A+E key port to 2x SATA 3.0 ports, which could connect 2x SSD solid state drives or mechanical hard drives with SATA ports at the same time via the SATA 3.0 data cable.
The adapter has two interfaces, which can connect to an SSD solid state hard disk, and allow switching three transmission rates: 6.0Gbps, 3.0Gbps, and 1.5Gbps, With hot-swap and hot-plug capabilities.
It can be widely used in various devices. Such as PCs, servers, industrial computers, consumer electronic equipment, storage devices, and NVR/DVR systems.
The NCQ technology can guarantee the performance and stability of the hard disk in the status of high load.
The built-in latest chip JMB582 is committed to meeting users’ demand for mass data space.

Product Detail

Product Tags

Technical Specifications
Warranty Information
Part number STC-EC0007 Warranty 3-years
Hardware
Cable Jacket Type NON Cable Shield Type NON Connector Plating Gold-plated Number of Conductors NON
Connector(s)
Connector A 1 - M.2 PCIe A+E Connector B 2 - SATA 7 Pin M
Physical Characteristics
Adapter Length NON Color Black Connector Style 180 Degree Wire Gauge NON
Packaging Information
Package Quantity Shipping (Package)
What's in the Box
M.2 to SATA Adapter A+E Key to Dual Ports SATA 3.0 Converter Hard Drive Expansion Card with 6Gbps JMB582.
Overview
M.2 NGFF Key A+E PCI Express to SATA 3.0 6Gbps Dual Ports Adapter Converter Hard Drive Extension Card JMB582. 1> Supports one lane of PCI Express, Support NGFF (M.2) 2230 key A/E, Complies with PCI Express Base Specification Revision 3.1a. Supports PCIe link layer power-saving mode. Supports 2 SATA ports. M.2 A+E Key, Supports Port 2>Compliant with Serial ATA AHCI (advanced host controller interface) Specification Rev 1.0, Supports SATA 3.0 transfer rate up to 6Gbps, Read / Write Speed 850 MB/s 3>JMB582 Chipset, Port Multiplier FIS-based and Command-based switching supported. Hot-plug and Hot-swap SATA ports. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. 4>Compatible with Windows XP/7/8/10/MAC/NAS/Linux OS. No driver installation is required. Support install Windows OS from Win10 PE. 5>You only need to insert this card into the M.2 slot of the motherboard, and then connect 2 SSD solid state drives or mechanical hard drives with SATA ports at the same time through the SATA data cable. 6>This product can be converted to 2ports SATA interfaces through the M.2 (A+E Key) slot of the PC host. Using PCI-E3.0 bandwidth, data transmission speed is much faster than PCI-E2.0. 7>The card is widely used in PCs, servers, industrial computers, consumer electronic equipment, storage devices, and NVR/DVR systems.