M.2 B+M Key to 2 Ports SATA 3.0 Expansion Card

Warranty                                                              3-years

Color                                                                    Black

Interface                                                               SATA

2 x SATA 7P Cable

Single gross weight: 0.15 kg                                    

M.2 B+M Key to 2 Ports SATA 3.0 Expansion Card, M.2 B & M Key to 2 Ports SATA 3.0 Expansion Card, M.2 B+M Key to SATA III 2 Ports Expansion Card Jmicro JMB582 Chipset, Add Two SATA 3.0 Devices to Any M.2 2242 Slot.

M.2 B and M Key to 2 Ports SATA 3.0 Expansion Card, PCI Express NGFF Key B+M to SATA 3.0 6Gbps Dual Ports Vertical Adapter Converter Hard Drive Extension Card JMB582.

1. Supports one lane of PCI Express.

2. Complies with PCI Express Base Specification Revision 3.1a.

3. Supports PCIe link layer power-saving mode.

4. Supports 2 SATA port.

5. M.2 B+M Key interface.

6. Complies with SATA Specification Revision 3.2.

7. Supports command-based and FIS-based for Port Multiplier. 

8. Supports AHCI mode and IDE programming interface.

9. Supports Native Command Queue (NCQ).

10. Supports SATA link power saving mode (partial and slumber)

11. Supports SATA plug-in detection capability.

12. Supports drive power control and staggered spin-up.

13. Supports SATA Partial / Slumber power management state. 

Single JMicron JM582 Chipset

For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB582 can achieve 850MB/s.

Compatible with Windows and Linux

Using the JMB582 chipset, the SI-ADA40149 can provide an extra 2 Port SATA III to any M.2 slot with PCIe Gen3 x1 of bandwidth.

2242 M.2 Size B+M Key

Please refer to your motherboard documentation to make sure that your M.2 module fits and works with the corresponding socket on the motherboard.

SATA port is swappable

Plug-and-Play is supported, no additional software installation or settings are required.

M.2 modules are neither hot-swappable nor hot-pluggable. Performing hot-swap or hot-plug may damage the modules.

System Requirements

1. Windows 7 (X86/X64)

2. Windows 8/8.x / 10 (X86/X64) (Windows in-box driver)

3. Linux-base OS

4. UEFI

Package Contents

1 × M.2 to 2-Port SATA Card

1 × User Manual

1 × SATA Cable