Warranty                                                                       3-year

Connector B                                                                  1 - HDMI/Mini HDMI/Micro HDMI (male/female)

Connector Style                                                           Straight to Angle

Product Weight                                                            4.2 oz [118 g]

Weight                                                                          4.4 oz [125 g]

FPV HDMI Male HDTV FPC Flat Cable

internal HDMI cable

Friendly reminder:

1. Please check the orientation of HDMI ends

2. if you are looking for FPV ribbon cables with different ends and lengths(5cm-100cm)

3. Those ribbon cables are triple-tested for reliability. Nonetheless, should you ever experience a cable failure, please contact us for immediate assistance. FPV HDMI RIBBON CABLES

SPECIFICATION LISTS12 types of HDMI ends:

1. MICRO HDMI (6X2.3mm) 4 types available:

MICRO D-1 90 degrees.

MICRO D-2 90 degrees (reverse orientation of D-1).

Micro D3 straight plug

Micro female

2.Mini HDMI(10.5X2.5mm) 4 types available:

MINI C-1 90 degree.

MINI C-2 90 degree(Reverse orientation of C-1).

Mini HDMI straight plug.

MINI FEMALE plug

3. Standard HDMI 2.0 (14x4.5mm) 4 types available:

Standard A-1 straight plug.

Standard HDMI 90degree A-2.

Standard HDMI A-3 90 degrees (Reverse orientation of A-2).

Standard FEMALE plugLengths available: 5cm, 10cm, 20cm, 30cm, 40cm, 50cm, 60cm, 80cm, 100cm

Customer Feedback

"This is the perfect 'internal' HDMI cable when you have a small project that needs a very low profile HDMI cable. Its length was more than enough for my retro pie handheld build and not too long where I had excessive excess. I like that one of the ends is angled because it fits perfectly into a 5-inch TFT display without extending too far beyond the border of the display. The cable is very thin but sturdy enough to snake it through a small project box without any trouble. I would only use this cable on a project that the cable was going to be enclosed, and not at a hinge where the cable would be bending constantly."

"Was wall mounting a display with a back-facing HDMI port instead of down and this is just what I needed! You can see it pictured between the monitor and Raspberry Pi in the attached photo."

"Using this cable with my GH5s to connect to an external monitor while operating on a DJI Ronin-S. The length is good, maybe a little too long but I don't mind considering the Ronin-S can randomly go into selfie mode with an accidental 3 trigger press and this gives more than enough slack to not pull on the devices. The reason it loses 1 star is that it cannot output 4k as was advertised when I purchased it, the GH5s can output a 4k signal and my monitor can display in 4k so I was looking for a lightweight HDMI cable that could handle 4k and when I purchased the cable it said 4k support. After communicating with the company directly they have updated the verbiage to be more clear. I have other HDMI cables that work perfectly with the GH5s and my monitor outputs 4k so I know it's possible, they're just not this thin and light so I'd rather stick with this one. The silver lining is that the Gh5s can downress the output to 1080p so I can continue using this cable for my purposes, but if you need it to output a 4k signal for an external recorder or some other reason, this cable isn't the one. Also, it comes in a nice plastic box that fits in my camera bag perfectly so storing and transporting is easy."

"Our DVD player is sitting on a narrow shelf so there was no room for a normal HDMI cable to be plugged into the back. This 90-degree angled cable worked perfectly. Very happy with the quality of the product."

"This is the perfect 'internal' HDMI cable when you have a small project that needs a very low profile HDMI cable. Its length was more than enough for my retro pie handheld build and not too long where I had excessive excess. I like that one of the ends is angled because it fits perfectly into a 5-inch TFT display without extending too far beyond the border of the display. The cable is very thin but sturdy enough to snake it through a small project box without any trouble. I would only use this cable on a project that the cable was going to be enclosed, and not at a hinge where the cable would be bending constantly."