Cheap PriceList for China Xaja 5cm Short Soft Fpv HDMI Cable Mini Type C Male to Male Standard Right Angle 90 Degree for 5D3
Applications:
- 1x USB Type-A female
- 1x Micro USB 5pin female
- Flat soft ribbon micro USB female to FFC USB female extension cable
- Super soft and very light .Only 5g. Color black. Low profile
- Micro USB to Standard USB A .Can directly transmit AV signal
- Strong anti-interference capacity.Gold plated pins,Great quality.
Product Detail
Product Tags
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for Cheap PriceList for China Xaja 5cm Short Soft Fpv HDMI Cable Mini Type C Male to Male Standard Right Angle 90 Degree for 5D3, At our firm with top quality to start with as our motto, we manufacture products that are entirely made in Japan, from materials procurement to processing. This enables them to get used with confident peace of mind.
Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for 5cm Short Soft Fpv HDMI Cable, China Fpv HDMI Cable, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
| Technical Specifications |
| Warranty Information |
| Part number STC-FPV-002
Warranty 2-years |
| Hardware |
| Cable Jacket Type PVC - Polyvinyl Chloride
Cable Shield Type Flat Slim Thin Ribbon FPC Cable Connector Plating Nick |
| Performance |
| Type and Rate USB 2.0 - 480 Mbit/s |
| Connector(s) |
| Connector A 1 - USB Type-A female Connector B 1 - Micro USB-female |
| Physical Characteristics |
| Cable Length 5/10/15/20/30/40/50/60/80/100cm
Color Black Connector Style Straight to Straight Product Weight 0.8 oz [25 g] Wire Gauge 28/28 AWG |
| Packaging Information |
| Package Quantity 1Shipping (Package)
Weight 0.8oz [25g] |
| What's in the Box |
FPV Flat Slim Thin Ribbon FPC Micro USB to USB Type A female extension cable
|
| Overview |
FPV Flat Slim Thin Ribbon FPC Micro USB extension cableThe black FPV Flat Slim Thin Ribbon FPC Micro USB extension cable, Can directly transmit AV signal and for sync and charging.Very soft , lightweight ,flexible , thin slim USB cable. low profile. less than 5g,FFC USB FPV flat slim thin USB cable , ideal for FPV gimbal rig and applications in tight space/room.
Answer & Question Question: Hi is it possible to remove the usb a plug and solder wires to the +5v and gnd terminals by hand? Answer: Yes, the USB plug can be removed. you can unlock the latch /little black holder.It can be soldered. please be very swift and control the temperature around 200 degree (lower temperature ) while soldering
Question: Please can you confirm the length. I ordered one and it was only 50mm (5cm) long, not 50cm as per the title. Answer: Hello It should be 50cm. please contact seller and send them the photo for exchange (there is contact on the warranty card)
Question: What's the dimensions of the micro usb end? (i.e. how much it will protrude from a micro usb port & how long from 90 bend to the ribbon cable? thanks! Answer: In my case; where the microUSB connector on the device is not recessed, the connector of the cable protrudes 8,5mm from the device.When the connector is inserted into the device 2mm of the male part of the connector is still visible.From the center of the micro USB connector to the beginning of the ribbon cable is 10mm. The micro USB end is 12,1mm at the widest .I hope this information makes sense and is useful to you.
Feedback 1>"This was just what I needed, and it worked perfectly. 2>"I got the 20CM, and it's almost, but not quite long enough for 100% panning in both directions. It'll make it about 80% in one direction. I'd get the 30CM, if I get another. 3>"Just what I needed to power a Ring One doorbell camera from a solar panel. I had to modify the Ring base and mount but this item made it possible. First one failed after a time in a fixed application. Also ribbon can come uncounted if not careful!"
|
